New from Crystek, the CVCO55CXT-5340-5390 VCO (Voltage Controlled Oscillator) operates from 5340 to 5390 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -102 dBc/Hz @ 10 KHz offset and has excellent linearity. Output power is typically +3.0 dBm. The unit is packaged in the industry-standard 0.5" x 0.5" SMD package. Input voltage is 5V, with a max current consumption of 25 mA. Pulling and Pushing are minimized to 0.50 MHz and 1.50MHz/V respectively. Second harmonic suppression is -30 dBc typical.
|
Crystek Crystals introduces the CVS575S-500, a 500 MHz Voltage Controlled SAW (surface acoustic wave) Oscillator, or VCSO. SAW crystal technology provides low-noise and low-jitter performance with true sinewave output. It is offered in a 5 x 7.5 x 2.5 mm SMD package.
|
Design and Manufacturer of Custom and Standard Filters from 20 MHz to 20
|
MIL-PRF-14409 Sprague-Goodman Electronics, Inc. of Westbury, NY, USA, has received notification from the Defense Logistics Agency that it has successfully qualified four configurations of its sapphire dielectric trimmer capacitors to the specifications of the current issue of MIL-PRF-14409.
|
SXO-75 Clock The first synchronized crystal SynClock+ engine offering integrated synchronization functionality to eliminate the need for an external GPS sync circuit in many applications, the SXO-75 is designed for use in broadcast, defense, telecommunications, and other industries.
|
The CRM-20-105
|
The CRM-20-105 Directional Coupler covers 10 - 200 MHz with a lumped element design. This offers excellent electrical performance over a broadband. This unit has been designed, manufactured and qualified to meet military environments.
|
CRYSTEK CORPORATION Red Box VCOs The Red Box series of VCOs come in a robust aluminum enclosure (1.25 x 1.25 x0.58”) with SMA connectors. This new line will enhance the VCO’s durability
|
CRYSTEK CORPORATION NEW WIDE-RANGE 1600-3200 MHz VCO Fort Myers, FL, September 2007 - Crystek's CVCO55CW-1600-3200 VCO operates from 1600 MHz to 3200 MHz with a control voltage range of 0.5V~20V. This VCO features a typical phase noise of -93 dBc/Hz @ 10KHz offset and has excellent linearity. The model CVCO55CW-1600-3200 is packaged in the industry standard 0.5-in. x 0.5-in. SMD package. Input voltage is 5.0 V, with a max current consumption of 25 mA. Pulling and Pushing are minimized to 8.00 MHz and 4.00 MHz/V, respectively. Second harmonic suppression is -15 dBc typical. The CVCO55CW-1600-3200 is ideal for use in applications such as digital radio equipment, fixed wireless access, satellite communications systems, and base stations.
|
CRYSTEK CORPORATION New 1 to 2 GHz VCO The CVCO55CW-1000-2000 VCO operates from 1 to 2 GHz with a control voltage range of 1 to 20V. This VCO features a typical phase noise of -100 dBc/Hz @ 10 kHz offset and has excellent linearity. It comes in the industry standard 0.5 x 0.5" SMD package.
|
CRYSTEK CORPORATION Wide Band VCO The CVCO55CW-0100-0200 VCO operates from 100 to 200 MHz with a control voltage range of 0 ~ 5V. This VCO features a typical phase noise of -108 dBc/Hz @ 10 KHz offset and has excellent linearity. It comes in the industry standard 0.5 x 0.5" SMD package.
|
CRYSTEK CORPORATION New 3GHz VCO Fort Myers, FL, August 2007 - Crystek's CVCO55CC-2970-3230 VCO operates from 2970 MHz to 3230 MHz with a control voltage range of 0.5V~4.5V. This VCO features a typical phase noise of -104 dBc/Hz @ 10KHz offset and has excellent linearity. The model CVCO55CC-2970-3230 is packaged in the industry standard 0.5-in. x 0.5-in. SMD package. Input voltage is 5.0 V, with a max current consumption of 35 mA. Pulling and Pushing are minimized to 1.5 MHz and 3 MHz/V, respectively. Second harmonic suppression is -20 dBc typical. The CVCO55CC-2970-3230 is ideal for use in applications such as digital radio equipment, fixed wireless access, satellite communications systems, and base stations.
|
MICROSEMI LDMOS Transistors Three new LDMOS transistors for pulsed avionics applications are the
|
MICROSEMI Highest Power Transistor for TCAS Avionics Transmitters The TCS1200 is a new Class C biased, bipolar transistor that provides 1200W
|
Crystek Crystals Corp., New 5 X 7 VCSO Model CVS575 is a 622.08 MHz Voltage Controlled Saw Oscillator (VCSO) I GGHz VCSO Model number CVCSO-914-1000 is a 1 GHz Voltage Controlled Saw Oscillator (VCSO) that features -135 dBc/Hz phase noise at 10 KHz offset. It comes in a 9 x 14mm SMT package, uses a +5V supply, and operates from -20 to +70ºC.
High Performance Voltage-controlled Oscillators The CVC055BE VCO generates frequencies from 2.974 to 3.274 GHz with a control voltage range of 0.5 to 4.5 V DC. Phase noise is -70dBc/Hz at 1 kHz offset, -98 dBc/Hz at 10 kHz offset, -120 dBc/Hz at 100 kHz offset and -155 dBc/Hz a 10 MHz offset. Biasing required is 5 V DC at 17 mA. Output power into a 50 Ω load is 5 ±3 dBm. Second harmonic suppression is better than -20 dBc while supply pushing is 1.5 MHz/V max. Operating temperature range is -40º to +85ºC. size is a standard 0.5" x 0.5" SMDO package. Pricing is $12.95 ea. in 1000 piece quantities. |
Teledyne Microwave BAM Delay Device A bulk acoustic wave (BAM) delay device is available in a compact, surface-mount package. This unit is ideally suited for new altimeter system designs for commercial and military aircraft. It operates in the altimeter band frequency range of 4.2 to 4.4 GHz Frequency Synthesizers New low phase noise frequency synthesizers were designed to operate from 1.5 to 12.8 GHz with a 25% max, bandwidth. The series 9700 models provide low phase noise performance of -120 dBc/Hz (to 3.2GHz), -114 /d/bc/Hz (to 12.8GHz) at 100 Khz offset. Operating temperature is -2 to +75ºC. |
|
ITT Industries Microwave Systems For the important things - like clean, pure, fast signal - only the best will do. That's why you should know about WaveCor Synthesizers from ITT Microwave Systems. WaveCor Synthesizers use advanced proprietary digital techniques to produce signals form 50 MHz to 20 GHz, delivering the industry's best combination of ultra-fast switching, precise tuning, low phase noise and high spurious free dynamic range. This unparalleled performance is coupled with a flexible architecture, enabling solutions to be precisely tailored to your needs. The result? the best synthesizer value in the market today.
For more information:http://ittmicrowave.com |
|
Daico Industries Variable Gain LNA's This family of low noise amplifiers provides small signal fain in 1dB increments up to + 19dBm (P1dB). Output any gain value from -1 to 30 dB precisely using embedded digital attenuators. Three models operate from 60 to 2100 MHz with NF down to1.3 dB; include internal limiter and SMA connectors. With these new variable gain LNAs, one can digitally program the exact small signal gain required for a high performance system while maintaining excellent noise figure, e.g., 12 dB, 18 dB, 29 dB or whatever gain is desired. a +20 dBm CW limiter is included at no added cost to NF. Custom solutions can also be provided for special requirements. |
|
Semflex Adjustable Phase Trimmers The high performance PT Series Adjustable Phase Trimmers are designed for applications where phase match between cables ins critical to system performance. They enable the engineer/technician to make precision adjustment to the phase without other wise degrading the signal. Test Cable Assembly A new ultra-low loss test cable assembly solution for the satellite manufacturing industry is based on the company's top-selling HP cable series. The HP180 coaxial cable has been paired with a proprietary 3.5mm stainless steel connector design to deliver the lowest loss on the industry at a rated frequency of 32 GHz Mil/Aero Cable Assembly A new cable assembly series for military and aerospace applications, equipped with self-locking ZMA coaxial connectors. in now available. The self-locking mechanism feature of this bayonet-type connector eliminates the axial movement normally found in BNC connectors, while retaining the BNC's easy quarter-turn installation characteristic. The ZMA offers significant advantages in high vibration environments by giving the connector the mechanical stability of a threaded coupling nut, and the quarter-turn mating is highly beneficial where connector density is high and/or installation space is minimal. Connectors may be keyed with 3 and 4 lug patterns to create distinct mating patterns for each signal path. For more information:http://www.semflex.com |
